M4SENET-100
The M4SENET-100 provides an Ethernet interface for M4 series controllers such as the SNAP-LCM4 and the M4RTU. Connection is via a 10Base-T or 100Base-TX link, and standard TCP/IP transport is used for all transactions.

NOTE: This Ethernet card is designed for use with FactoryFloor software.
 

Item

Specification

Card Type

Ethernet NIC, communication coprocessor

Transports Supported

TCP/IP

Maximum Sessions

128 total; up to 128 for SNAP Ethernet I/O, up to 32 for host or peer

Communications

Ethernet 10Base-T or 100Base-TX Auxilliary: RS-232C
(for maintenance and kernel downloads)

Data Rate

10 or 100 Mbps auto-detected on Ethernet
19.2 Kbps or software selectable on serial port (maximum 115.2 Kbps)

Cable Type

Solid-core unshielded twisted pair, Category 5 recommended for
10 Mbps and required for 100 Mbps

Maximum Distance

100 meters from hub to node for single segments

Connectors

One RJ-45 Ethernet One five-position Phoenix type for serial port

Current Draw

1.00 Amps

Jumpers (Internal)

Boot to kernel/Boot to loader Normal operation/Restore factory defaults

Operating Temperature

0 to 70 °C

Storage Temperature

-40 to 85 °C

Humidity

0–95% humidity, non-condensing

 
 
 
OPTOTERMINAL-G20

OptoTerminal-G20 operator interface terminal is used for commissioning and troubleshooting SNAP 32-channel digital modules that include a diagnostic port such as the SNAP-IDC-32, SNAP-ODC-32-SRC, and SNAP-ODC-32-SNK. The OptoTer-minal-G20 displays the status of a 32-channel digital module’s points on a two-line LCD display and can also be used to turn output points on and off.
 
 
 
SNAP-PS5
The SNAP-PS5 power supply (120 VAC input) can provide 5 VDC power for loads up to 4 amps.
This power supply is compatible with SNAP PAC R-series, SNAP Ethernet, SNAP Ultimate, and SNAP Simple I/O units, as well as serial controllers and brains.
For example, the SNAP-PS5 power supply can provide power for: (1) a SNAP Ethernet brain, a SNAP mounting rack, and control power for I/O modules; or (2) a SNAP-LCSX or SNAP-LCSX-PLUS controller, a B3000 brain, a SNAP mounting rack, and control power for up to eight digital and eight analog SNAP I/O modules.
 

  SNAP-PS5 SNAP-PS5-24DC SNAP-PS5U
Input Voltage
95–130 VAC, 47–63 Hz
18–32 VDC
100–250 VAC, 47–63 Hz

Output Voltage

5.0 ±0.1 VDC

5.0 ±0.1 VDC

5.0 ±0.1 VDC

Output Current

4.0 A

4.0 A

5.0 A

Dimensions

4.05”x 4.20” x 2.00”

4.05”x 4.20” x 2.00”

6.34”x 4.13” x 2.53”

Weight

15 oz. (425.25 grams)

15 oz. (425.25 grams)

1.9 labs (863.63 grams)

Operating Temperature

0°to 70 °C

0°to 70 °C

0°to 70 °C

Storage Temperature

-30°to 85 °C

-30°to 85 °C

-30°to 85 °C

Fuse

Opto 22 PN: SNAP-FUSE1AB
Vendor PN: GDC-1A (Bussman)

Opto 22 PN: SNAP-FUSE2AB
Vendor PN: GDB-2A (Bussman)

Internal fuse

 
 
 
SNAP-PS5-24DC
The SNAP-PS5-24DC power supply (24 VDC input) can provide 5 VDC power for loads up to 4 amps. This power supply is compatible with SNAP PAC R-series, SNAP Ethernet, SNAP Ultimate, and SNAP Simple I/O units, as well as serial controllers and brains.
For example, the SNAP-PS5-24DC power supply can provide power for: (1) a SNAP Ethernet brain, a SNAP mounting rack, and control power for I/O modules; or (2) a SNAP-LCSX or SNAP-LCSX-PLUS controller, a B3000 brain, a SNAP mounting rack, and control power for up to eight digital and eight analog SNAP I/O modules. The power supply can be panel-mounted, or it can be DIN-rail mounted using the optional adapter (SNAP-PSDIN).
 
 
 
SNAP-PS5
SNAP-PS5-24DC
SNAP-PS5U
Input Voltage
95–130 VAC, 47–63 Hz
18–32 VDC
100–250 VAC, 47–63 Hz

Output Voltage

5.0 ±0.1 VDC

5.0 ±0.1 VDC

5.0 ±0.1 VDC

Output Current

4.0 A

4.0 A

5.0 A

Dimensions

4.05”x 4.20”x 2.00”

4.05”x 4.20”x 2.00”

6.34”x 4.13”x 2.53”

Weight

15 oz. (425.25 grams)

15 oz. (425.25 grams)

1.9 labs (863.63 grams)

Operating Temperature

0°to 70 °C

0°to 70 °C

0°to 70 °C

Storage Temperature

-30°to 85 °C

-30°to 85 °C

-30°to 85 °C

Fuse

Opto 22 PN: SNAP-FUSE1AB
Vendor PN: GDC-1A (Bussman)

Opto 22 PN: SNAP-FUSE2AB
Vendor PN: GDB-2A (Bussman)

Internal fuse

 
 
 
SNAP-PS5U
The SNAP-PS5U power supply (100-250 VAC input) can provide 5 VDC power for loads up to 5 amps. This power supply is compatible with SNAP PAC R-series, SNAP Ethernet, SNAP Ultimate, and SNAP Simple I/O units, as well as serial controllers and brains.
For example, the SNAP-PS5U power supply can provide power for: (1) a SNAP Ethernet brain, a SNAP mounting rack, and control power for I/O modules; or (2) a SNAP-LCSX or SNAP-LCSX-PLUS controller, a B3000 brain, a SNAP mounting rack, and control power for up to eight digital and eight analog SNAP I/O modules.
 
 
SNAP-PS5
SNAP-PS5-24DC
SNAP-PS5U
Input Voltage
95–130 VAC, 47–63 Hz
18–32 VDC
100–250 VAC, 47–63 Hz

Output Voltage

5.0 ±0.1 VDC

5.0 ±0.1 VDC

5.0 ±0.1 VDC

Output Current

4.0 A

4.0 A

5.0 A

Dimensions

4.05”x 4.20”x 2.00”

4.05”x 4.20”x 2.00”

6.34”x 4.13”x 2.53”

Weight

15 oz. (425.25 grams)

15 oz. (425.25 grams)

1.9 labs (863.63 grams)

Operating Temperature

0°to 70 °C

0°to 70 °C

0°to 70 °C

Storage Temperature

-30°to 85 °C

-30°to 85 °C

-30°to 85 °C

Fuse

Opto 22 PN: SNAP-FUSE1AB
Vendor PN: GDC-1A (Bussman)

Opto 22 PN: SNAP-FUSE2AB
Vendor PN: GDB-2A (Bussman)

Internal fuse

 
 
 
SNAP-PS24
The SNAP-PS24 power supply provides 24 volts of DC power. This power supply is ideal for powering a SNAP PAC S-series controller (such as the SNAP-PAC-S1) or for providing loop power for SNAP analog modules mounted on a SNAP M-series or B-series rack.
AC power connections are made to a removable terminal strip on top of the power supply. DC output power is hooked up using the attached wiring harness.
 

 

SNAP-PS24

SNAP-PS24U

Input Voltage

95 to 130 Volts AC, 47-63 Hz

100–250 Volts AC, 47–63 Hz

Output Voltage

24 ± 0.6 Volts DC

24 ± 0.1 Volts DC

Output Current

0.75 Amps

1.25 Amps

Dimensions

4.05”x 4.89” x 2.00”

6.34”x 4.13” x 2.53”

Weight

2.1 Pounds

1.9 Pounds (863.63 grams)

Temperature:

 

 

     Operating
     Storage

0 °C to 70 °C
-30 °C to 85 °C

0 °C to 70 °C
-30 °C to 85 °C

Fuse:

 

 

     Opto 22 P/N
     Vendor P/N

SNAP-FUSE1AB
GDC-1A (Bussman)

Internal fuse

 
 
 
SNAP-PS24U
The SNAP-PS24U power supply provides 24 Volts (1.25 Amps) of DC power. This power supply is ideal for powering a SNAP PAC S-series controller (such as the SNAP-PAC-S1) or for providing loop power for SNAP analog modules mounted on a SNAP M-series or B-series rack.
AC power connections are made to a removable terminal strip on top of the power supply. DC output power is hooked up using the attached wiring harness.
 

 

SNAP-PS24

SNAP-PS24U

Input Voltage

95 to 130 Volts AC, 47-63 Hz

100–250 Volts AC, 47–63 Hz

Output Voltage

24 ±0.6 Volts DC

24 ±0.1 Volts DC

Output Current

0.75 Amps

1.25 Amps

Dimensions

4.05”x 4.89”x 2.00”

6.34”x 4.13”x 2.53”

Weight

2.1 Pounds

1.9 Pounds (863.63 grams)

Temperature:

 

 

     Operating
     Storage

0 °C to 70 °C
-30 °C to 85 °C

0 °C to 70 °C
-30 °C to 85 °C

Fuse:

 

 

     Opto 22 P/N
     Vendor P/N

SNAP-FUSE1AB
GDC-1A (Bussman)

Internal fuse

 
주소: (121-758) 서울특별시 마포구 공덕동 256-13 제일빌딩 1101호 세경데이타시스템(주)
Tel: (02)703-2999 / Fax: (02)703-8558 Copyright(C) 1998-2007 세경데이타시스템(주) All rights reserved.